DWDM-SFP10G-33.47-80-I operates as a 10GBASE-DWDM SFP+ transceiver at rates up to 10.7Gbps, using DWDM channel C55 at 1533.46nm; the cooled EML transmitter and APD receiver are specified for transmission up to 80 km over single-mode fiber (SMF). It provides real-time DOM and supports an industrial operating range of -40°C to +85°C for monitoring and operation across demanding field conditions.
Ciena Part Number
DWDM-SFP10G-33.47-80-I
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1533.46nm
Max Cable Distance
80km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
APD
TX Power
-1 to +5dBm
RX Power
-23 to -6dBm
Receiver Sensitivity
-23dBm
DDM/DOM
Supported
Operating Temperature Range
-40 to +85°C
Protocols
10GBASE-ZR/ZW, SDH STM64, SFF-8431, SFF-8472
Key Features of Ciena DWDM-SFP10G-33.47-80-I Compatible LINK-PP 10G SFP+
Ciena DWDM-SFP10G-33.47-80-I Compatible LINK-PP module is an industrial-grade 10G DWDM SFP+ transceiver built for 80km single-mode transmission. Its hot-pluggable footprint, duplex LC port, and real-time diagnostics make it a practical building block for dense metro aggregation and other long-span links.
A hot-pluggable SFP+ footprint lets the module slide into standard cages and come online without a reboot, and the design follows the SFP+ MSA so it behaves predictably across vendors. Power is supplied from a single +3.3V rail, the standard voltage already available on SFP+ host slots.
DWDM-SFP10G-33.47-80-I: 10 Gbps Connectivity for Dense Metro Aggregation
Data rates up to 10.7Gbps give this DWDM SFP+ module enough throughput to keep dense metro aggregation nodes from becoming bottlenecks. That headroom lets aggregation sites absorb steady growth in subscriber traffic without a hardware refresh.
DWDM-SFP10G-33.47-80-I Module with DWDM Technology for Fiber Efficiency
Dense wavelength division multiplexing lets a single fiber pair carry several 10G channels at once, so existing cable does far more work. Each additional wavelength adds capacity on the fiber already in place, allowing operators to scale bandwidth without stringing new strands.
DWDM-SFP10G-33.47-80-I Module with 1533.46nm Wavelength
The internal laser is fixed at 1533.46nm, the ITU C55 grid position on 100GHz channel spacing. That precise placement keeps the signal inside its assigned slot so neighbouring wavelengths stay clean.
Reach extends to 80km over single-mode fiber, letting this DWDM transceiver link sites across a metro area without regeneration. Spans of that length reduce the number of powered intermediate sites a network has to build and maintain.
DWDM-SFP10G-33.47-80-I Module with Duplex LC Interface
Duplex LC connectors accept the single-mode patch cords already installed in most racks and keep insertion loss to a minimum. The compact body also leaves room for tidy cabling on high-density panels.
DWDM-SFP10G-33.47-80-I Module with DOM for Real-Time Monitoring
Digital optical monitoring reports live transmit power, receive power, bias current, and operating temperature from inside the module. Operators can read those values remotely and act before a marginal link turns into an outage.
Ciena DWDM-SFP10G-33.47-80-I Compatible LINK-PP DWDM SFP+ transceiver is manufactured under strict quality management systems to guarantee high industrial reliability. The module fully complies with recognized international standards, including ISO 9001, CE, RoHS, and FCC certifications.
Every 10G DWDM transceiver undergoes rigorous factory screening, including signal integrity checks and extended temperature evaluations. This comprehensive assessment ensures consistent long-distance performance in harsh operational environments.
DWDM-SFP10G-33.47-80-I Quality Certifications
Recognized regulatory approvals prove that every transceiver module fulfills rigorous safety and environmental standards. These global quality endorsements guarantee dependable operation across enterprise and industrial networks.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
DWDM-SFP10G-33.47-80-I Certified for Reliable Host-Device Compatibility
Extensive interoperability checks ensure smooth integration with major switches, routers, and optical transport gear. This thorough validation prevents hardware errors and guarantees reliable plug-and-play operation.
Every Ciena DWDM-SFP10G-33.47-80-I Compatible LINK-PP DWDM 10G SFP+ module passes strict optical evaluations to ensure stable signal quality across long-distance DWDM links. To learn more about our testing procedures, please visit the LINK-PP Test Support Center.
Optical Spectrum Test
Inspect center wavelength precision to maintain strict channel separation.
Eye Pattern Test
Evaluate optical waveform clarity to ensure reliable high-speed transmission.
Bit Error Rate Test
Measure data signal accuracy to guarantee error-free optical transport.
Temperature Test
Verify module thermal resilience under severe industrial operating conditions.
Product Shipping for Ciena DWDM-SFP10G-33.47-80-I Compatible LINK-PP 10G SFP+
All Ciena DWDM-SFP10G-33.47-80-I Compatible LINK-PP 10G DWDM transceivers are packed securely to protect product integrity during transport. We collaborate with trusted global carriers to deliver orders quickly and safely to your facility.
Anti-Static Protective Packaging
Prevent static electricity damage during transport and handling.
Shock-Resistant Transport Protection
Protect optical modules from physical impact during shipping.
Fast Order Processing and Dispatch
Process customer orders quickly for rapid warehouse shipping.
Global Logistics and International Delivery
Ship transceivers worldwide using trusted express carriers.
Installing the DWDM-SFP10G-33.47-80-I DWDM SFP+ involves latching the transceiver into a host slot and patching LC single-mode fiber directly to a DWDM Mux/Demux. This transceiver module enables reliable 10Gbps channel transmission, effectively funneling multi-node traffic within dense metro aggregation topologies.
DWDM-SFP10G-33.47-80-I Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal DWDM-SFP10G-33.47-80-I module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Not automatically. Confirm that the MUX/DEMUX supports the C55 wavelength at 1533.46nm and the required channel spacing. Also check insertion loss, optical power limits, and the remote-end module specifications. by LINK-PP Technical Support
It may suit a compatible 10G DWDM design with a suitable optical path. The module supports up to 10.7Gbps and specifies an 80km reach, but the route loss, channel plan, and host equipment must also meet the design requirements. by LINK-PP Technical Support
The module's specified operating range is -40°C to +85°C. Also check the host switch's temperature limits, airflow, and actual cabinet temperature, especially if the equipment is installed outdoors or in a remote enclosure. by LINK-PP Technical Support
We are considering the LS-DW5510-80I for a long-span link between network aggregation points. The 80km reach may fit our route, and DOM offers useful diagnostic visibility. Final approval will depend on compatibility checks and measured optical loss.
Please write comments with more than three
character.
498985
616372
J***s
Germany
Verified Purchase
5.0
2026-09-21
We considered this module for a connection between enterprise aggregation sites. The Duplex LC interface fits our patch panels, and the 10.7Gbps specification meets our planned rate. Our final selection also depends on the host port and channel compatibility.
Please write comments with more than three
character.
498985
616367
C***r
Hong Kong
Verified Purchase
5.0
2026-04-07
Our engineers reviewed the TX power range of -1 to +5dBm and RX power range of -23 to -6dBm during planning. These figures help us assess the optical budget, but we still need to account for actual fiber attenuation, connectors, splices, and other passive components.
Australia · English · AUD
