10G-SFPP-ZRD-1536.61-I is a 10GBASE-DWDM SFP+ transceiver operating at the ITU Channel 51 (1536.61nm) wavelength over single-mode fiber with a duplex LC connector. It supports link distances up to 80km and is built with an industrial-grade design to run reliably across harsh -40°C to 85°C environments.
Brocade Part Number
10G-SFPP-ZRD-1536.61-I
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1536.61nm
Max Cable Distance
80km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
APD
TX Power
-1 to +5dBm
RX Power
-23 to -6dBm
Receiver Sensitivity
-23dBm
DDM/DOM
Supported
Operating Temperature Range
-40 to +85°C
Protocols
10GBASE-ZR/ZW, SDH STM64, SFF-8431, SFF-8472
Key Features of Brocade 10G-SFPP-ZRD-1536.61-I Compatible LINK-PP 10G SFP+
10G-SFPP-ZRD-1536.61-I SFP+ transceiver sends 10G data over distances up to 80 km using efficient DWDM channels. Built-in digital monitoring function and tough industrial temperature support make it easy to manage across demanding setups.
This hot-pluggable transceiver module complies fully with SFP+ multi-source agreements to guarantee wide hardware interoperability across switches and routers. Built with an industrial operating range of -40°C to 85°C, the device maintains stable optical links in severe environmental conditions.
10G-SFPP-ZRD-1536.61-I: 10 Gbps Connectivity for Fiber-Constrained Backbones
Line rates of 10Gbps deliver sufficient bandwidth to alleviate congestion across regional networks and corporate aggregation points. This continuous throughput makes it suitable for demanding metro transport rings, enterprise backbones, and cell site gateways.
10G-SFPP-ZRD-1536.61-I Module with DWDM Technology for Fiber Efficiency
Dense wavelength division multiplexing combines multiple independent data channels onto a single strand pair to maximize existing infrastructure capacity. By utilizing narrow channel spacing, carriers can expand total network throughput without laying expensive new fiber lines.
10G-SFPP-ZRD-1536.61-I Module with 1536.61nm Wavelength
Channel 51 operates at an exact center wavelength of 1536.61nm aligned with the standardized 100GHz ITU-T frequency grid. The cooled EML transmitter maintains low spectral drift to prevent adjacent channel interference during multiplexing.
Extended optical reach allows data to travel across 80km fiber routes without extra repeaters or amplifiers along the way. Regional backbone networks rely on this span to link distant central offices and keep traffic moving smoothly.
10G-SFPP-ZRD-1536.61-I Module with Duplex LC Interface
Dual LC receptacles establish secure, low-loss physical contact with common industry-standard optical patch cables. The compact latching connector enables high-density port layouts while facilitating fast field patching and maintenance.
10G-SFPP-ZRD-1536.61-I Module with DOM for Real-Time Monitoring
Digital optical monitoring continuously reports vital operating metrics, including internal temperature, supply voltage, laser bias current, and optical power. These live diagnostic statistics enable field technicians to quickly isolate link faults and execute preventative maintenance before service drops occur.
Brocade 10G-SFPP-ZRD-1536.61-I Compatible LINK-PP DWDM SFP+ transceiver meets strict international quality and safety benchmarks, carrying full certifications for ISO 9001, CE, RoHS, and FCC.
Every 10G DWDM transceiver undergoes comprehensive electrical, optical, and thermal stress testing to ensure flawless operation before leaving the factory.
10G-SFPP-ZRD-1536.61-I Quality Certifications
Official regulatory approvals verify that the transceiver module adheres strictly to global safety, environmental, and electromagnetic standards.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
10G-SFPP-ZRD-1536.61-I Certified for Reliable Host-Device Compatibility
Comprehensive multi-vendor switch verification confirms seamless plug-and-play operation across leading networking brands without configuration errors.
Every 10G-SFPP-ZRD-1536.61-I SFP+ DWDM transceiver undergoes strict factory verification to ensure rock-solid signal stability and long-term durability. To explore our full testing procedures and equipment, visit the LINK-PP Test Support Center.
Optical Spectrum Test
Verify central wavelength precision to prevent adjacent channel optical interference.
Eye Pattern Test
Analyze optical signal quality to guarantee clear transmitter waveform integrity.
Bit Error Rate Test
Measure transmission accuracy to ensure error-free data delivery across links.
Temperature Test
Check thermal stability to confirm dependable operation under severe conditions.
Product Shipping for Brocade 10G-SFPP-ZRD-1536.61-I Compatible LINK-PP 10G SFP+
Each 10G-SFPP-ZRD-1536.61-I DWDM 10G SFP+ module is securely packaged and quickly dispatched through trusted logistics channels. We provide dependable worldwide delivery to ensure your products arrive safely and on schedule.
Anti-Static Protective Packaging
Protect sensitive internal optics against electrostatic discharge during storage.
Shock-Resistant Transport Protection
Shield optical components from unexpected mechanical impacts during transit.
Fast Order Processing and Dispatch
Handle incoming requests promptly to prepare items for immediate dispatch.
Global Logistics and International Delivery
Ship orders via worldwide carriers to ensure timely overseas delivery.
Insert the 10G-SFPP-ZRD-1536.61-I optical transceiver into an SFP+ slot and patch it directly to a passive DWDM Mux/Demux using duplex LC fiber. This hot-pluggable connection expands fiber-constrained backbones immediately, multiplexing dedicated 10G channels onto existing single-mode runs without disrupting live adjacent network wavelengths.
10G-SFPP-ZRD-1536.61-I Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal 10G-SFPP-ZRD-1536.61-I module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Yes. It can provide a 10G optical connection for an LTE backhaul network. Make sure your equipment supports the module, your DWDM system supports the C51 channel, and the total link loss stays within the optical power budget. by LINK-PP Technical Support
Yes. DOM readings remain available while the module operates within its rated temperature range of -40°C to +85°C. Your switch must also support reading the module’s diagnostic data. by LINK-PP Technical Support
Yes, provided the total link loss stays within the optical power budget with some margin to spare. Include fiber, splice, connector, and any MUX/DEMUX losses, and test the link before deployment. by LINK-PP Technical Support
Yes. Temperature control helps keep the laser wavelength stable within the C51 channel, while the EML design supports long-distance transmission. Actual link performance still depends on fiber loss and dispersion. by LINK-PP Technical Support
We manage a private network connecting several medical office buildings with a central data facility. The goal is to add another 10G service over existing fiber. This 1536.61nm DWDM transceiver fits the C51 channel selected for the project and supports standard duplex LC connections.
Please write comments with more than three
character.
498932
585955
G***y
Morocco
Verified Purchase
5.0
2026-04-27
Our server room needed another 10G optical uplink for a remote backup facility. This C51 DWDM SFP+ matches the assigned wavelength and supports our existing duplex LC single-mode cabling.
Please write comments with more than three
character.
498932
585950
A***s
Maldives
Verified Purchase
4.0
2026-03-03
The courier had to complete an additional security check at the transit facility, which added a day to delivery. The module arrived safely with its protective packaging intact. A more accurate delivery update would have been helpful.
Please write comments with more than three
character.
498932
585946
G***y
Brazil
Verified Purchase
5.0
2026-01-05
We are planning a 10G connection between a regional university campus and a remote research center. The LINK-PP C51 DWDM SFP+ fits the wavelength assigned to our proposed transport route. Its duplex LC interface also matches the single-mode fiber patch panels already installed at both locations.
Australia · English · AUD
