The DWDM-SFP10G-63.05-I SFP+ transceiver module integrates a cooled EML laser and APD photodiode across the 100GHz ITU C-band at 1563.04nm (C18) to deliver reliable 10GBASE-DWDM connectivity. It provides up to 80km transmission over single-mode fiber (SMF) alongside integrated real-time digital optical monitoring for continuous operational tracking.
Netgear Part Number
DWDM-SFP10G-63.05-I
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1563.04nm
Max Cable Distance
80km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
APD
TX Power
-1 to +5dBm
RX Power
-23 to -6dBm
Receiver Sensitivity
-23dBm
DDM/DOM
Supported
Operating Temperature Range
-40 to +85°C
Protocols
10GBASE-ZR/ZW, SDH STM64, SFF-8431, SFF-8472
Key Features of Netgear DWDM-SFP10G-63.05-I Compatible LINK-PP 10G SFP+
Netgear DWDM-SFP10G-63.05-I Compatible LINK-PP module is an industrial-grade SFP+ DWDM transceiver designed to deliver 10Gbps data transmission over single-mode fiber links up to 80km. Combining a standard hot-pluggable SFP+ package, precise 1563.04nm wavelength tuning, and built-in digital monitoring, it provides a stable and fiber-efficient solution for harsh operating environments.
The module incorporates a hot-pluggable SFP+ footprint that allows technicians to install or replace units without powering down host equipment. Built in strict compliance with the SFP+ MSA specification, it guarantees dependable electrical fit and wide interoperability with standard SFP+ switch ports.
DWDM-SFP10G-63.05-I: 10 Gbps Connectivity for Industrial Automation Networks
Continuous 10Gbps transmission speed satisfies the heavy data traffic requirements of modern industrial automation networks. This stable bandwidth provides sufficient throughput to keep all connected industrial machinery and control systems communicating without latency or bottlenecks.
DWDM-SFP10G-63.05-I Module with DWDM Technology for Fiber Efficiency
Dense Wavelength Division Multiplexing (DWDM) enables multiple independent communication channels to share a single optical fiber pair simultaneously. By multiplying bandwidth over existing fiber lines, it eliminates the need to install costly new fiber cables.
DWDM-SFP10G-63.05-I Module with 1563.04nm Wavelength
A dedicated 1563.04nm operating wavelength corresponds directly to channel C18 on the standard 100GHz ITU grid. This precise spectral accuracy minimizes channel interference and keeps the optical signal clean when multiplexed alongside other DWDM wavelengths.
The cooled EML laser and high-sensitivity APD receiver allow this 10G DWDM module to span long-distance single-mode fiber links reaching up to 80km. This extended reach accommodates distant edge connections, inter-facility conduits, and remote industrial plant backhaul.
DWDM-SFP10G-63.05-I Module with Duplex LC Interface
The industry-standard duplex LC receptacle ensures quick, secure mechanical coupling with common single-mode fiber patch cables. Its standardized compact connector design delivers low insertion loss and consistent physical fiber alignment.
DWDM-SFP10G-63.05-I Module with DOM for Real-Time Monitoring
Real-time Digital Optical Monitoring (DOM) constantly reads operating metrics including temperature, supply voltage, laser bias current, and optical transmit/receive power. Fully compatible with SFF-8472 digital diagnostics functions, it enables network administrators to detect anomalies early and simplify routine link maintenance.
The Netgear DWDM-SFP10G-63.05-I Compatible LINK-PP DWDM module is manufactured under strict quality standards and holds international certifications including ISO 9001, CE, RoHS, and FCC to ensure safety and regulatory compliance.
Each DWDM SFP+ module undergoes rigorous optical, electrical, and environmental stress testing before shipment to guarantee stable long-term performance.
DWDM-SFP10G-63.05-I Quality Certifications
These recognized industry certifications confirm that the transceiver adheres to stringent global standards for operational safety and environmental responsibility.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
DWDM-SFP10G-63.05-I Certified for Reliable Host-Device Compatibility
Comprehensive interoperability testing verifies that the transceiver integrates smoothly and communicates reliably across a wide range of leading brand host switches and routers.
Every DWDM-SFP10G-63.05-I SFP+ DWDM transceiver module undergoes comprehensive performance validation to ensure dependable signal integrity and long-term operating stability. To learn more about our rigorous verification processes, visit the LINK-PP Test Support Center.
Optical Spectrum Test
Measure central wavelength and spectral width to ensure signal precision.
Eye Pattern Test
Analyze optical waveform quality to confirm clean and stable transmission.
Bit Error Rate Test
Check data packet transmission accuracy to eliminate potential communication errors.
Temperature Test
Monitor optical transmission under severe temperature fluctuations for thermal stability.
Product Shipping for Netgear DWDM-SFP10G-63.05-I Compatible LINK-PP 10G SFP+
LINK-PP provides secure packaging and dependable freight solutions to guarantee your DWDM-SFP10G-63.05-I 10G DWDM optical transceivers arrive in perfect condition. Every order is processed promptly through reliable logistics channels to ensure timely delivery to your sites.
Anti-Static Protective Packaging
Prevent electrostatic discharge damage during storage to ensure electronic safety.
Shock-Resistant Transport Protection
Protect optical modules against vibration and drops during cargo transit.
Fast Order Processing and Dispatch
Handle purchase orders efficiently to accelerate warehouse handling and dispatch.
Global Logistics and International Delivery
Coordinate with trusted international carriers for dependable worldwide parcel delivery.
To deploy the DWDM-SFP10G-63.05-I 10G DWDM module, slide it into the host switch's SFP+ slot until locked, remove the dust cap, and securely connect the duplex LC fiber patch cable. Verify real-time link diagnostics through the DOM function to enable stable, long-reach data communication across industrial automation networks.
DWDM-SFP10G-63.05-I Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal DWDM-SFP10G-63.05-I module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
It runs entirely off the standard single +3.3V power supply rail specified by the SFP+ Multi-Source Agreement. It does not require any proprietary chassis power feeds or auxiliary voltage lines. by LINK-PP Technical Support
Absolutely. It is widely used in LTE and wireless transport architectures, especially where backhaul links require 10G speeds over long fiber runs through harsh outdoor climates. by LINK-PP Technical Support
Yes. We can pre-code the internal EEPROM of each module to match the exact switch platforms, routers, or servers you deploy in your network. by LINK-PP Technical Support
Yes. The 1563.04nm wavelength strictly follows the ITU-T 100GHz grid Channel 18 specification. It connects seamlessly into the matching C18 channel port of standard passive DWDM multiplexers and demultiplexers without spectrum drift. by LINK-PP Technical Support
Clean DOM reporting on temperature, bias current, and TX power via CLI. SFF-8472 compliance makes remote fiber monitoring totally painless across our metropolitan ring.
Please write comments with more than three
character.
498489
565120
M***s
Bulgaria
Verified Purchase
5.0
2026-07-07
Deployed this C18 1563.04nm DWDM transceiver between two branch offices over a 65km span. DDM shows solid -16dBm RX power on the APD receiver with clean 10.7Gbps throughput. ;)
Australia · English · AUD
