The LINK-PP LS-CW4310-40I is an industrial-grade 10G CWDM SFP+ optical transceiver engineered for high-speed fiber communications. Operating at a nominal 1430nm wavelength over single-mode fiber (SMF), it features a cooled DFB transmitter, high-sensitivity PIN receiver, duplex LC connector, and SFF-8472 DOM support, delivering reliable 10Gbps data transmission across link distances up to 40km.
Key Features of LINK-PP LS-CW4310-40I 10G CWDM SFP+
The LINK-PP LS-CW4310-40I delivers superior optical performance through its robust cooled DFB laser, wide operating temperature span from -40°C to +85°C, hot-pluggable SFP+ architecture, and low power dissipation. Designed for demanding telecom networks, this 10G CWDM transceiver ensures unmatched signal integrity and protocol compliance.
LINK-PP LS-CW4310-40I 10G SFP+ Optical Module
Built in a compact SFP+ form factor, the LINK-PP LS-CW4310-40I optical module combines an integrated transmitter and receiver unit, supporting multi-rate data bandwidths from 8.0Gbps to 10.7Gbps for Ethernet and OTN infrastructures.
LS-CW4310-40I: 10G Connectivity for RRH Fiber Transport
Optimized for LTE and 5G wireless networks, the LS-CW4310-40I provides high-bandwidth 10G connectivity between baseband units and remote radio heads (RRH), withstanding outdoor cabinet thermal fluctuations reliably from -40°C to +85°C.
LS-CW4310-40I Module with CWDM Technology for Fiber Efficiency
Utilizing advanced coarse wavelength division multiplexing (CWDM) technology, the LS-CW4310-40I module multiplies optical transmission capacity across existing fiber strands, dramatically reducing fiber leasing expenses and maximizing metro aggregation bandwidth efficiency.
LS-CW4310-40I Module with 1430nm Wavelength
Operating precisely at the 1430nm ITU-T CWDM channel, the LS-CW4310-40I transceiver integrates a stabilized cooled DFB laser to deliver minimal wavelength drift, high side-mode suppression ratio, and exceptional optical spectral purity.
LS-CW4310-40I Module Supporting 40km Transmission
Engineered with a powerful 15dB optical link budget, the LS-CW4310-40I module supports long-haul single-mode fiber links up to 40km, ensuring reliable 10Gbps data transport across extended enterprise and metropolitan carrier networks.
LS-CW4310-40I Module with Duplex LC Interface
Featuring an industry-standard duplex LC optical connector interface, the LS-CW4310-40I transceiver ensures effortless fiber patching, secure mechanical locking, ultra-low insertion loss, and seamless compatibility with standard high-density optical distribution frames.
LS-CW4310-40I Module with DOM for Real-Time Monitoring
Compliant with the SFF-8472 standard, the LS-CW4310-40I features real-time Digital Optical Monitoring (DOM) capabilities, tracking module temperature, supply voltage, laser bias current, transmit optical power, and received signal levels accurately.
LINK-PP LS-CW4310-40I 10G SFP+ Certification
The LINK-PP LS-CW4310-40I adheres to world-class safety and environmental directives, maintaining full compliance with CE, FCC, UKCA, UL, RoHS, and REACH international quality and regulatory standards.
Every LS-CW4310-40I unit undergoes a comprehensive multi-stage quality assurance protocol, verifying signal integrity, optical stability, and zero-defect data transmission before leaving our certified production and testing facility.
LS-CW4310-40I Quality Certifications
Certified under ISO9001 and international optical safety frameworks, the LS-CW4310-40I meets Class 1 laser safety criteria, electromagnetic compatibility requirements, and strict hazardous substance restriction mandates.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
LS-CW4310-40I Certified for Reliable Host-Device Compatibility
The LS-CW4310-40I is rigorously tested across leading OEM switches, routers, and transport gear, ensuring seamless plug-and-play interoperability without recognition errors or protocol compatibility issues in deployment.
Verifies error-free 10Gbps transmission with BER below 1×10⁻¹² under full PRBS pattern payload conditions.
Temperature Test
Assures flawless thermal operation across the complete industrial range from -40°C to +85°C.
Product Shipping for LINK-PP LS-CW4310-40I 10G SFP+
Each LINK-PP LS-CW4310-40I transceiver is professionally packaged to eliminate electrostatic risks and physical damage during rapid global transit and warehouse dispatch.
Anti-Static Protective Packaging
Sealed in individual ESD shielding clamshells to prevent electrostatic component discharge.
Shock-Resistant Transport Protection
Cushioned with custom high-density foam cartons for safe transit protection.
Fast Order Processing and Dispatch
Streamlined warehouse operations guarantee immediate order handling and rapid courier dispatch.
Global Logistics and International Delivery
Partnered with top international carriers to deliver fast worldwide shipping.
The LINK-PP LS-CW4310-40I features hot-pluggable installation into any SFP+ cage. Simply insert the module, connect the duplex LC single-mode fiber patch cord, and verify link lock via port LEDs and switch CLI diagnostic commands.
LS-CW4310-40I Technical Support
LINK-PP provides professional technical support, including pre-sales consultation, compatibility verification, and post-deployment troubleshooting to ensure smooth network operation.
Pre-Sales Technical Consultation
Professional technical guidance to help customers select the most suitable LS-CW4310-40I modules based on network architecture and application requirements.
Compatibility Verification Support
Compatibility checks and validation to ensure seamless operation with Cisco switches and other supported networking platforms.
Deployment & Installation Assistance
Step-by-step support for installation, configuration, and initial deployment to ensure stable and correct operation.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle to ensure reliable performance in enterprise and carrier-grade networks.
Australia · English · AUD
{{reply_items.topic || reply_items.text}}By {{reply_items.author}}