SFP-GE-T-I is an industrial-grade 1000BASE-T SFP copper transceiver module engineered for host systems with a SERDES interface, driving data reliably across 100m of Category 5 twisted-pair cabling with a typical power dissipation of just 1.05W while enduring extreme thermal envelopes from -40°C to +85°C.
Adtran Part Number
SFP-GE-T-I
Vendor Name
LINK-PP
Part Status
Active
Form Factor
SFP
Max. Data Rate
1.25G
Max. Cable Distance
100m
Media
Cat 5
Connector
RJ-45
Rx LOS
NO
DDM/DOM
Not Supported
Operating Temperature Range
-40 to 85°C
Protocols
IEEE Std 802.3 and 802.3ab, SFP MSA Compliant
Key Features of Adtran SFP-GE-T-I Compatible LINK-PP 1G SFP
Adtran SFP-GE-T-I Compatible LINK-PP stands as an industrial-grade 1000BASE-T SFP copper transceiver module engineered for dependable Gigabit Ethernet expansion over standard network cabling. Operating across severe temperature fluctuations, this hot-pluggable SFP module integrates strong EMI protection, low power usage, and standard copper interfaces into a compact form factor.
Constructed with a fully metallic enclosure, this hardware piece effectively minimizes electromagnetic interference (EMI) to ensure clean signal paths. Network administrators can easily monitor diagnostic data and access the internal physical layer IC via a standard 2-wire serial bus interface. Such design details guarantee excellent structural durability alongside deep component-level transparency.
SFP-GE-T-I: 1 Gbps Connectivity for Industrial IoT Nodes
Delivering sustained 1Gbps throughput, this component serves as a robust communications backbone for heavy automation systems and smart grid deployments. Edge controllers, manufacturing sensors, and remote gateways maintain uninterrupted data feeds even under harsh operating conditions. The resulting low-latency performance keeps complex automated workflows perfectly synchronized.
SFP-GE-T-I Module Supporting 100m Transmission
Operating up to 100m over standard twisted-pair Category 5 cabling, this copper transceiver provides reliable local coverage for point-to-point hardware links. Such a reach easily accommodates standard connection spans required between scattered terminal equipment across a factory floor or within the same multi-level facility. Stable data paths are maintained across the full length of the run, fully satisfying standard enterprise and industrial copper networking limits.
SFP-GE-T-I Module with RJ45 Interface
Featuring a standard RJ45 connector, this module allows you to plug in traditional copper network cables quickly and easily. Using this familiar interface simplifies everyday maintenance and saves time during field setups. The secure clicking lock ensures the cable stays firmly connected, preventing accidental disconnects even in high-vibration environments.
Adtran SFP-GE-T-I Compatible LINK-PP undergoes rigorous compliance audits to secure global industry marks, including ISO 9001, CE, RoHS, and FCC certifications.
To maintain peak network uptime, all copper modules undergo exhaustive electrical performance checks and physical stress simulations before dispatch, meeting the highest industry benchmarks.
SFP-GE-T-I Quality Certifications
These official international approvals verify that the module meets strict safety, environmental, and manufacturing standards for industrial deployments.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
SFP-GE-T-I Certified for Reliable Host-Device Compatibility
Comprehensive cross-vendor checks guarantee seamless plug-and-play operation and steady data links across a wide range of industrial switches and routers.
Rigorous Testing Ensures Reliable SFP Performance
Each copper SFP transceiver undergoes strict validation to guarantee stable data transmission, and you can explore the complete validation methodologies at the LINK-PP Test Support Center.
Electrical Performance Test
Verify signal voltage levels and copper impedance requirements.
Eye Pattern Test
Analyze signal wave quality to ensure optimal transmission.
Bit Error Rate Test
Measure data packet accuracy during high-speed traffic runs.
Temperature Test
Check stable hardware operation under varying thermal conditions.
Product Shipping for Adtran SFP-GE-T-I Compatible LINK-PP 1G SFP
Secure packaging protocols ensure your modules arrive safely. Reliable dispatch channels guarantee efficient global transit.
Anti-Static Protective Packaging
Shield vulnerable internal electronic components from harmful electrostatic discharge.
Shock-Resistant Transport Protection
Guard hardware securely against sudden physical impacts during transit.
Fast Order Processing and Dispatch
Prepare all outgoing shipments quickly to minimize project downtime.
Global Logistics and International Delivery
Seamless cross-border shipping powered by trusted global carriers.
Integrating the SFP-GE-T-I 1000BASE-T copper module involves a simple hot-plug setup into compatible SFP slots, requiring zero network downtime. Once connected via RJ45 patch cords, it provides immediate Gigabit links for industrial automation systems, harsh outdoor security networks, and field-level IoT gateway setups.
SFP-GE-T-I Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal SFP-GE-T-I module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
A:
Yes, its fully metallic zinc alloy housing offers superior EMI shielding to protect signal integrity in high-vibration, high-noise industrial settings. By
admin on
2026-03-28
A:
Not at all. The LP-SFP-MS8I copper module is a true industrial-grade module rated for -40°C to +85°C operating case temperatures. By
admin on
2026-02-19
A:
No. The LP-SFP-MS8I features low power dissipation (typically just 1.05W per module). Its metallic enclosure also aids heat dissipation, making dense side-by-side port layouts safe under normal airflow. By
admin on
2025-09-03
A:
Yes, it utilizes a hot-pluggable SFP footprint, allowing you to insert or remove it anytime without rebooting the switch or disturbing other ports. By
admin on
2025-05-11
Deployed in cabinets near heavy equipment, the low EMI design really shows — no interference on nearby analog lines. The metallic enclosure feels robust and suited for industrial‑adjacent rooms.
Please write comments with more than three
character.
494914
398162
B***r
Germany
Verified
Purchase
5 .0
2025-10-19
Our monitoring tools can access the PHY over the 2‑wire serial bus, which makes troubleshooting much easier. For a 1G copper SFP, this is a very clean implementation.
Please write comments with more than three
character.
494914
398165
M***s
Australia
Verified
Purchase
5 .0
2025-09-29
Hot‑pluggable design makes field swaps easy — no need to power down the whole switch for a single port change. Link re‑establishes quickly, which is great for maintenance windows.
Please write comments with more than three
character.
494914
398161
J***r
Republic of Korea
Verified
Purchase
5 .0
2025-06-08
We use these modules in a campus network where fiber runs between buildings and copper finishes the last segment. The 100m Cat5 runs are now standardized on this 1000BASE‑T SFP copper module. Link training is quick, and the low EMI design prevents interference with nearby analog and control lines. Industrial -40 to +85°C temperature rating matches our indoor and semi‑outdoor cabinets perfectly. The 2‑wire bus access to the PHY IC simplifies remote health checks. For fiber‑to‑the‑floor architectures, this is a practical, cost‑effective building block.
Please write comments with more than three
character.
494914
398168
I***m
Maldives
Verified
Purchase
5 .0
2025-05-20
We swapped our old copper SFPs for these 1G modules and the link comes up fast every time. The fully metallic housing keeps EMI low even next to power cables, and power draw stays around 1W as specified.
Australia · English · AUD
