CW47-10GSFP-10-I is specified as a 10G SFP+ CWDM transceiver centered at 1470nm, providing a duplex LC interface, DOM functionality, up to 10km reach over single-mode fiber, and support for -40°C to +85°C environments. Designed for high-density optical networking, this hot-swappable module combines advanced DFB and PIN components with robust industrial-grade reliability to ensure seamless, low-latency performance across harsh enterprise and telecom infrastructures.
Key Features of Arista CW47-10GSFP-10-I Compatible LINK-PP 10.7G SFP+
Arista CW47-10GSFP-10-I Compatible LINK-PP module is an industrial-grade CWDM SFP+ optical transceiver module built for dependable data transmission over single-mode fiber. It works at 1470nm, supports up to 10km link distance, and includes duplex LC connectivity with real-time DOM functions. The device is designed to operate in demanding environments with a temperature range from -40°C to +85°C.
CW47-10GSFP-10-I module comes in a hot-pluggable SFP+ form factor, allowing quick deployment and replacement without interrupting system operation. A DFB laser paired with a PIN photodiode enables stable optical output and precise signal detection across the link.
CW47-10GSFP-10-I: 10 Gbps Connectivity for Surveillance Networks
Up to 10Gbps data throughput ensures smooth handling of high-resolution video streams. The module supports continuous data delivery, which is important for monitoring systems that rely on real-time transmission.
CW47-10GSFP-10-I Module with CWDM Technology for Fiber Efficiency
By using CWDM technology, multiple wavelengths can share the same fiber infrastructure. This approach helps reduce fiber usage and simplifies network expansion without additional cabling.
CW47-10GSFP-10-I Module with 1470nm Wavelength
The 1470nm operating wavelength aligns with CWDM channel standards, helping maintain signal clarity over long distances. It also supports stable coexistence with other wavelengths in the same network.
Designed for medium-range links, it can transmit data up to 10km over single-mode fiber. This makes it suitable for interconnection between distributed network points.
CW47-10GSFP-10-I Module with Duplex LC Interface
Equipped with a duplex LC connector, it separates transmit and receive channels for consistent signal flow. The standard interface ensures compatibility with common fiber patch cables.
CW47-10GSFP-10-I Module with DOM for Real-Time Monitoring
Real-time DOM functionality allows users to monitor parameters such as optical power levels, temperature, and supply voltage. This visibility helps with troubleshooting and maintaining stable network operation.
Arista CW47-10GSFP-10-I Compatible LINK-PP meets industry standards such as ISO 9001, CE, RoHS, and FCC, ensuring compliance with quality, safety, and environmental requirements.
Comprehensive validation processes are applied to confirm optical accuracy, signal stability, and performance under different operating conditions.
CW47-10GSFP-10-I Quality Certifications
Manufacturing follows controlled quality procedures to ensure consistent module performance and long-term reliability.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
CW47-10GSFP-10-I Certified for Reliable Host-Device Compatibility
Interoperability testing with major switches and networking platforms helps ensure seamless integration and dependable link behavior.
LINK-PP SFP+ optical module is validated through comprehensive optical and environmental checks to support stable network operation. Explore detailed test methods at the LINK-PP Test Support Center.
Optical Spectrum Test
Confirm precise wavelength output and signal clarity.
Eye Pattern Test
Validate eye height and width for clean transmission.
Bit Error Rate Test
Check data accuracy during high-speed transmission.
Temperature Test
Ensure consistent function under extreme conditions.
Product Shipping for Arista CW47-10GSFP-10-I Compatible LINK-PP 10.7G SFP+
Orders are handled with care to maintain product integrity. Efficient logistics help deliver your transceiver quickly and securely.
Anti-Static Protective Packaging
Shield modules from static electricity during transit.
Shock-Resistant Transport Protection
Absorb external impacts to protect internal components.
Fast Order Processing and Dispatch
Move orders swiftly from warehouse to carrier.
Global Logistics and International Delivery
Reach customers worldwide through reliable shipping partners.
Arista CW47-10GSFP-10-I Compatible LINK-PP module operates by plugging into an SFP+ slot and linking duplex LC fiber for CWDM-based 10G transmission. It supports scenarios like industrial Ethernet, surveillance systems, and distributed network nodes where steady 10km reach and 1470nm wavelength performance are required.
CW47-10GSFP-10-I Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal CW47-10GSFP-10-I module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
A:
Yes, every LS-CW4710-10I CWDM module is shipped with a protective dust cap fitted over the duplex LC port to keep the optical interface clean and dust-free during transit. By
admin on
2026-04-16
A:
The LS-CW4710-10I module supports up to 10km over compliant single-mode fiber within its optical budget. Actual reach depends on total fiber loss, connector loss, splices, and link cleanliness. By
admin on
2026-01-22
A:
Yes, use it with a MUX/DEMUX port assigned to the 1470nm CWDM channel. Make sure both ends of the fiber link use matching 1470nm optics. By
admin on
2025-11-08
A:
Yes, it has a hot-pluggable SFP+ footprint, allowing instant installation or replacement on live equipment without system disruption. By
admin on
2025-07-29
A:
Yes, the industrial temperature range makes it suitable for factory, utility, transportation, and edge-network deployments. It supports 10Gbps transmission over SMF. By
admin on
2025-04-06
Used this LS-CW4710-10I 1470nm CWDM SFP+ for a 10km single-mode fiber run between two campus buildings. It came up at 10Gbps right away, and the Duplex LC connection was straightforward. DOM values were available from the host, which made acceptance testing much easier.
Please write comments with more than three
character.
494821
407628
C***n
Sweden
Verified
Purchase
5 .0
2026-03-19
Our team tested this industrial-grade CWDM SFP+ module as part of a multi-site switch refresh. We specifically needed a 1470nm 10km optic because the fiber route was already assigned to that CWDM wavelength; a generic 10G LR module would not have worked with the passive wavelength multiplexer. The module delivered a stable 10Gbps link over the installed single-mode fiber path and maintained normal DOM telemetry throughout burn-in. We also tested it in an equipment room and an edge cabinet to confirm that the industrial temperature range was suitable for both indoor and semi-exposed deployments. Power draw was reasonable for our high-density SFP+ design, and no errors appeared during continuous traffic testing. For campus networks, base station backhaul, remote cabinets, and fiber uplinks needing 1470nm CWDM, it checks the right boxes.
Please write comments with more than three
character.
494821
407627
S***r
Australia
Verified
Purchase
5 .0
2026-01-15
Installed one in a roadside network enclosure where summer heat is always a concern. The -40°C to 85°C industrial rating was the main reason we selected it. So far, the 1470nm CWDM link has stayed stable with no CRC errors.
Please write comments with more than three
character.
494821
407630
I***z
India
Verified
Purchase
5 .0
2025-12-05
Upgraded our suburban node inter-switch links with these 10G CWDM modules. The 10km link budget leaves plenty of margin for splices along the pathway. EEPROM coded properly and recognized by our main aggregation switches without hassle.
Please write comments with more than three
character.
494821
407632
E***n
Spain
Verified
Purchase
5 .0
2025-10-02
Deploying 10G optical transceivers inside an active manufacturing plant involves heavy electrical noise, ambient dust, and wide ambient temperature swings (-20°C to 60°C inside sealed NEMA enclosures). This industrial-grade 10G SFP+ 1470nm CWDM module handled the environment effortlessly.
We ran an 8.5km single-mode fiber link back to the main control center. The optical link budget easily compensated for multiple patch panels along the routing path. Having active DOM readouts allows our NOC to monitor laser aging and optical attenuation shifts proactively. Will be stocking additional spare inventory of this exact part number for upcoming factory line expansions.
Please write comments with more than three
character.
494821
407636
O***z
Netherlands
Verified
Purchase
5 .0
2025-09-27
We ordered these for a phased data center-to-edge-site build where different hardware groups required OEM-coded optics. The supplier confirmed the requested coding before shipment, and our standard host compatibility checks were completed before the wider rollout. Every unit was recognized properly in the test environment, with digital diagnostics visible in the monitoring platform.
Technically, this 10G CWDM SFP+ 1470nm module suits the job well: 10Gbps throughput, 10km over single-mode fiber, DFB CWDM optics, PIN receiver, and Duplex LC connectivity. TX power and RX sensitivity were consistent with the published specification, and the links held steady under sustained backup and virtualization traffic. It is a good choice for teams that need a compact industrial-grade optic rather than a commercial-temperature module.
Please write comments with more than three
character.
494821
407634
A***s
France
Verified
Purchase
5 .0
2025-08-09
We needed a 10G 1470nm CWDM optical transceiver for an existing fiber multiplexing project, not a standard 1310nm LR module. This module matched the wavelength plan, installed cleanly, and has been stable in daily office-to-warehouse traffic.
Please write comments with more than three
character.
494821
407629
M***s
Brazil
Verified
Purchase
5 .0
2025-06-30
Bought a few batch units of this industrial-grade 10G 1470nm CWDM transceiver for a remote substation upgrade. Operating temperature stability is impressive (-40°C to 85°C rated). Standard duplex LC connector snapped in cleanly and optical power levels stayed stable on our 8km single-mode fiber run.
Please write comments with more than three
character.
494821
407613
M***z
Republic of Korea
Verified
Purchase
5 .0
2025-05-11
This LS-CW4710-10I industrial-grade 10G SFP+ transceiver went into a control-network aggregation switch located in an unconditioned cabinet. Temperatures can move from below freezing in winter to very warm in direct summer conditions, so the -40°C to 85°C specification mattered more to us than the lowest unit price. The module has been stable through our initial environmental testing and did not show abnormal temperature alarms. The module’s 1470nm CWDM wavelength also helped us expand capacity on an existing single-mode fiber pair rather than pulling new cable. We paired it with the correct passive CWDM channel and used the DOM data to establish a baseline optical-power record for maintenance. For industrial Ethernet backhaul, this is a practical 10Gbps fiber optic solution.
Please write comments with more than three
character.
494821
407614
M***r
Bangladesh
Verified
Purchase
5 .0
2024-10-21
The items did arrive and in great shape. I have installed them and just put them to use this last Monday. All went very well. I use to do business with l-p.com from my previous employer as well and have always found your products to be great both cost and quality wise.
Please write comments with more than three
character.
494821
407621
j***A
United States
Verified
Purchase
5 .0
2024-07-14
I received my order very Fast and in excellent condition. The 10/25/40G Transceiver Modules and Lan Transformer were exactly as stated and well packaged. I'll test them tomorrow and reedit the review.
Please write comments with more than three
character.
494821
407612
P***z
Morocco
Verified
Purchase
5 .0
2023-09-02
I have ordered three LAN Magnetic Transformer for my project and all those I am getting are reasonably priced and will be delivered next day which is perfect.
Australia · English · AUD
